Function And Basic Settings - Leuze electronic MSI 400 Series Manual

Hide thumbs Also See for MSI 400 Series:

Table of Contents

Fig. 5.6:

Drag data bytes into the routing table using drag & drop

NOTICE

You can make use of the same data byte several times in the routing table.

"Properties" docking window

In the Properties docking window, the configuration dialog appears for the data byte which you have selec-

ted in the Gateway view.

Depending on the data byte, you can configure individual parameters. You can also allocate tag names

here.

Fig. 5.7:

Configuration dialog in the "Properties" docking window

5.2

Function and basic settings

5.2.1

Routing

The process diagram, transferred to the network from the MSI 400 gateway, comprises the operating data

(e.g. logic results, state of inputs and outputs) and the diagnostic data (e.g. module status, CRCs). This

data have been arranged in 4 data sets.

Tab. 5.2:

Content of data sets 1–4

Data set

Content

Process data

CRCs

State and diagnosis

Reserved

Leuze electronic

Configuration of gateways with MSI.designer

Size

50 bytes

32 bytes

60 bytes

MSI 400

Configurable

Yes

Table of Contents