Leuze electronic MSI 400 Series Manual page 32

Scenario 2: You are using the gateway function on the module MSI 430
You implement the gateway functionality via the controller module. In this case you must use the MSI 430
module as the controller module for the controller and explicitly set the gateway functionality there.
How to activate the gateway function on the MSI 430 module:
Ä Open the Modules docking window.
Ä Select the MSI 430 module.
Ä Open the Properties docking window.
Ä Select the desired gateway function from the Gateway selection list.
Fig. 5.2: MSI 430 module with activated gateway function
5.1.2 "Gateway" view
If you have activated the gateway functionality in MSI.designer automatically the Gateway view is active.
There you can edit the gateway configuration.
Setup
Depending on module configuration, in the Gateway view, you will see two or three tabs:
Module configuration
You use a gateway module for
gateway configuration
Leuze electronic
Setup
In the Gateway view you see two tabs with the routing tables for the in-
put and output values.
Example: MSI-FB-ETHERCAT module
MSI 400
Configuration of gateways with MSI.designer
32