Leuze electronic MSI 400 Series Manual page 33

Module configuration
You are using the gateway
function of the MSI 430 mod-
ule
Visualization
• If you are using several gateways
The Gateway view always only shows one gateway configuration. If you are using several gateways,
you can toggle between the configurations by making use of the Select data set view menu:
• When the program window is very small
If the window in which you have opened MSI.designer is very small, not all tabs may be shown.
In this case an arrow symbol will appear, allowing you to toggle between the tabs:
Commands
Via the command bar of the Gateway view, you have access to the following view-specific features:
Tab. 5.1: Key
Element
Leuze electronic
Setup
In the Gateway view you see an additional third tab Gateway configura-
tion.
It contains the basic settings for the gateway function of the MSI 430
module:
Description
Only with a connection to the controller:
Stops the controller.
Only with a connection to the controller:
Starts a stopped controller.
Zoom
This determines the size of the display in the Gateway view work area.
Undo
This renders the last action undone.
Redo
This makes an action that has been undone redone.
Standard
This resets the configuration of the gateways to the basic settings.
Also see: Basic settings for the process data [chapter 5.2.2]
MSI 400
Configuration of gateways with MSI.designer
33