Editing The Gateway Input Values (Tab 2) - Leuze electronic MSI 400 Series Manual

Configuring additional direct gateway output values
You can add new output values (bytes) in addition to the pre-allocated output values in the Gateway view.
Ä Click on an empty byte in the Gateway view.
Ä Open the Properties docking window and assign a tag name for the byte in the configuration dialog.
ð Tag names for all bits are automatically pre-allocated under Parameters.
Ä If you also want to change the tag names of individual bits:
Overwrite the pre-allocated values with the desired new value under Parameters in the configuration
dialog.
In the Logic view, these bits will appear with the corresponding tag names.
5.4

Editing the gateway input values (tab 2)

You can use the following settings for the output values of a gateway in tab 2:
Basic setting
Depending on the gateway function selected, you will find four or eight bytes in tab 2, which are reserved
as direct gateway input values. You can also see these bytes in the Logic docking window.
Example: MSI-FB-CANOPEN module with four predefined inputs for gateways:
"Logic" docking window
In the Logic docking window you see
these four bytes under Inputs:
Leuze electronic
Configuration of gateways with MSI.designer
"Gateway" view
In the Gateway view, these four inputs appear in tab 2:
MSI 400 40