Gateway" And "Properties" Docking Windows - Leuze electronic MSI 400 Series Manual

Fig. 5.4: Routing table with input values
Tab 3: "Gateway configuration"
Tab 3 only appears if you have activated MSI-EN-MOD or MSI-EN-IP.
Fig. 5.5: "Gateway configuration" tab for MSI-EN-MOD
NOTICE
i
Allocation of input and output data
The output and input data listed here refer directly to the data blocks in tab 1 and tab 2.
Ä Output data group (to the PLC):
Only data set 1 can be configured. This refers directly to Output data block 1 in tab 1.
Ä Input data (from PLC) group:
Data set 1 to data set 5 refer directly to input data block 1 to input data block 5 in tab 2.
5.1.4

"Gateway" and "Properties" docking windows

In addition to the Gateway view, in the gateway configuration in MSI.designer you work with the following
windows:
"Gateway" docking window
From the Gateway docking window you can drag hardware data bytes into empty cells in the routing table
(Gateway view).
Leuze electronic
Configuration of gateways with MSI.designer
MSI 400 35