412
AIR COMPRESSOR, POWER STEERING PUMP, AND POWER
7. Remove caps and install oil supply hose to elbow
assembly (M10) (Figure 652). Tighten oil supply
line fitting.
8. Install oil drain hose elbow and clamps.
Power Steering Pump with Air Compressor
Figure 653 Power steering pump with air compressor
1.
Power steering pump gasket
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
TAKE-OFF
2.
Hex flange bolt, M10 x 35
EGES-265-2
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
1
2
H16019
3.
Power steering pump assembly
3