Specifications; Special Torque; Special Tools - Navistar INTERNATIONAL DT 466 Service Manual

Specifications
Table 54 Engine Brake Specifications
Brake actuator lash (cold)
Engine exhaust valve lash (cold)

Special Torque

Table 55 Engine Brake Special Torques
Brake Control Pressure (BCP) sensor
Brake piston adjustment locknut
Brake shutoff solenoid Tinnermann nut
Brake shutoff valve
High-pressure oil rail bolts (M8 x 90)
Plug assembly, M10
Plug assembly, M12
Injection Control Pressure (ICP) sensor
Oil pressure relief valve
Rail End Plug Assembly or attenuator

Special Tools

Table 56 Engine Brake Special Service Tools
Feeler gauge (long)
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
DIAMOND LOGIC® ENGINE BRAKE
EGES-265-2
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
0.48 mm (0.019 in)
See (Adjusting Valve Lash,
page150 )
20-30 N·m (15-22 lbf·ft)
27 N·m (20 lbf·ft)
7 - 11 N·m (5 - 8 lbf·lb)
24-30 N·m (18-22 lbf·ft)
27 N·m (20 lbf·ft)
12 N·m (108 lbf·in)
12 N·m (108 lbf·in)
20-30 N·m (15-22 lbf·ft)
41-48 N·m (30-35 lbf·ft)
204 N·m (150 lbf·ft)
Obtain locally
405