Specifications - Navistar INTERNATIONAL DT 466 Service Manual

200
Specifications
Table 19 Front Cover, Vibration Damper, Gerotor Oil Pump, Front Engine Mount, and Gear Train
Specifications
Camshaft gear end play
Camshaft gear-to-upper idler gear backlash
High-pressure pump end play
Lower idler gear-to-air compressor gear backlash
Lower idler gear-to-crankshaft gear backlash
Oil pump end clearance
Oil pump side clearance
Upper idler gear-to-high-pressure oil pump gear backlash
Upper idler gear-to-lower idler gear backlash
Vibration damper face runout (max.)
Vibration damper maximum allowable member misalignment
Engine fan drive
configuration
466 high-mount, (Horton
DriveMaster)
570 high-mount, (Horton
DriveMaster)
570 high-mount, (Horton
DriveMaster)
570 high-mount, (Horton
DriveMaster)
570 high-mount, (Horton
DriveMaster)
466 high-mount, (Horton
DriveMaster)
466 high-mount, (Horton
DriveMaster)
466 mid-mount, (Horton
DriveMaster)
466 high-mount, (spin-on)
570 high-mount, (spin-on)
466 mid-mount, (spin-on)
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
FRONT COVER AND RELATED COMPONENTS
Fan Drive Configurations Diameters and Ratios
Fan CL to Crankshaft CL,
mm (in)
508 (20)
508 (20)
508 (20)
465 (18.3)
465 (18.3)
465 (18.3)
465 (18.3)
411 (16.2)
465 (18.3)
465 (18.3)
411 (16.2)
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
Pulley Diameter
OBD, mm (in)
242.8 (9.56)
242.8 (9.56)
219.4 (8.636)
201.2 (7.92)
201.2 (7.92)
219.4 (8.636)
219.4 (8.636)
201.2 (7.92)
201.2 (7.92)
201.2 (7.92)
201.2 (7.92)
EGES-265-2
0.33 mm (0.013 in)
0.46 mm (0.018 in)
0.45 -1.22 mm
(0.018 - 0.48 in)
0.508 mm (0.020 in)
0.36 mm (0.014 in)
0.05 -0.13 mm
(0.002-0.005 in)
0.36 - 0.48 mm
(0.014 - 0.019 in)
0.48 mm (0.019 in)
0.48 mm (0.019 in)
1.52 mm (0.060 in)
1.50 mm (0.060 in)
Drive Ratio
0.894 : 1
1.08 : 1
1.2 : 1
1.3 : 1
1.3 : 1
1.2 : 1
0.99 : 1
1.08 : 1
1.08 : 1
1.3 : 1
1.08 : 1