Special Torque; Special Service Tools - Navistar INTERNATIONAL DT 466 Service Manual

278

Special Torque

Table 39 Crankcase, Crankshaft and Camshaft Special Torques
Camshaft thrust plate bolts
Crankcase ladder, M12 x 35
Coolant heater bolt
Crankcase ladder, M10 x 25
Crankshaft main bearing cap bolt torque and sequence

Special Service Tools

Table 40 Crankcase, Crankshaft and Camshaft Special Service Tools
Cam gear puller
Camshaft bushing puller
Dial indicator set
Hot plate
Nylon brush
Plastigage®.
Prussian Blue®
Tap, cylinder head bolt holes
Tap set
Stiff nylon brush
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
CRANKCASE, CRANKSHAFT, AND CAMSHAFT
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
EGES-265-2
26 N·m (19 lbf·ft)
122 N·m (90 lbf·ft)
4.5 - 5.1 N·m (40 - 45 lbf·in)
63 N·m (46 lbf·ft)
(Torque Procedure for
Torque-to-Yield Main Bearing
Bolts, page271 )
ZTSE4411
ZTSE2893B
Obtain locally
Obtain locally
ZTSE4389
Obtain locally
Obtain locally
ZTSE4671
ZTSE4386
ZTSE4392