OIL SYSTEM MODULE ASSEMBLY AND SECONDARY FILTRATION
Specifications
Table 41 Oil System Module and Secondary Filter Specifications
Cooler heat exchanger, DT 466
Cooler heat exchanger, HT 570
Cooler heat exchanger, all engines with front drive axle
Oil pressure regulating valve, opening pressure
Oil filter bypass valve, opening pressure
Oil thermal valve, opening temperature
Special Torque
Table 42 Oil System Module and Secondary Filter Special Torques
Coolant drain plug, M18
Lube adapter bolts
Oil system module mounting bolts
Oil pressure regulator valve
Oil thermal valve assembly
Cooler heat exchanger mounting bolts, M8
Oil cooler drain tube bracket bolt
Oil supply tube fitting (turbocharger)
Plug assembly, M12
Secondary filter mounting bolts
Secondary filter stud assembly
Special Service Tools
Table 43 Oil System Module and Secondary Filter Special Tools
Air Pressure Regulator
Oil Cooler Test Plate
Oil Filter Wrench
Slide Hammer Puller Set
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
EGES-265-2
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
23 plates
33 plates
33 plates
380 kPa (55 psi) @ 38° C (100° F)
345 kPa (50 psi)
111° C (232° F)
24 N·m (18 lbf·ft)
29 N·m (21 lbf·ft)
26 N·m (19 lbf·ft)
68 N·m (50 lbf·ft)
29 N·m (21 lbf·ft)
29 N·m (21 lbf·ft)
26 N·m (19 lbf·ft)
24 - 26 N·m (17 - 19 lbf·ft)
5 N·m (46 lbf·in)
26 N·m (19 lbf·ft)
20 N·m (15 lbf·ft)
Obtain locally
ZTSE4654
ZTSE1879
Obtain locally
299