Removing The Oil Suction Tube - Navistar INTERNATIONAL DT 466 Service Manual

1
4
4
Figure 286 RTV sealant locations
1. Front cover (front half)
2. Front cover (rear half)
3. Use a knife or scraper to cut through the RTV
sealant under the oil pan gasket at six locations
on the crankcase mounting surface.
Figure 287 Removing the oil pan gasket
4. Remove the oil pan gasket from the crankcase
mounting surface and discard.
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
OIL PAN AND OIL SUCTION TUBE
3
2
4
4
3. Gasket
4. RTV sealant locations
EGES-265-2
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
(x 6)
5
5.
6.

Removing the Oil Suction Tube

Figure 288 Removing the oil suction tube
1. Remove two (M8 x 35) mounting bolts from the oil
suction tube.
6
4
4
H06031
Crankcase
Flywheel housing
207