Special Torque - Navistar INTERNATIONAL DT 466 Service Manual

Table 19 Front Cover, Vibration Damper, Gerotor Oil Pump, Front Engine Mount, and Gear Train
Specifications (cont.)
466 low-mount, (spin-on)
466 low-mount, Horton
DriveMaster)
570 low-mount, (spin-on)
570 low-mount, (Horton
DriveMaster)
466 low-mount, (bolt-on)
570 low-mount, (bolt-on)
NOTE: The high-mount and mid-mount fan drives share the same part number, however the fan drive is
inverted depending upon application.

Special Torque

Table 20 Front Cover, Vibration Damper, Gerotor Oil Pump, Front Engine Mount, and Gear Train
Special Torques
Automatic belt tensioner assembly
Damper retaining plate bolts
End cover adapter (PTO equipped engines only)
Fan drive, high-mount, Horton DriveMaster (20, 18.3 in.)
Fan drive, mid-mount, Horton DriveMaster (16.2 in.)
Fan drive, low-mount, Horton DriveMaster (12.2 in.)
Fan spacer retaining bolt, M10 x 20 (bolt-on drive only)
Front cover mounting bolts (rear half)
Front engine mounting bracket bolts (4)
Horton DriveMaster bearing retainer nut
Lower idler gear mounting bolt
Oil pump and rotor housing M8 bolts
Upper idler gear mounting bolt
Viscous or rubber vibration damper mounting bolts
Water outlet tube assembly at cylinder head
Water outlet tube assembly at front cover
Wear plate (water pump)
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
FRONT COVER AND RELATED COMPONENTS
310 (12.2)
310 (12.2)
310 (12.2)
310 (12.2)
310 (12.2)
310 (12.2)
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
201.2 (7.92)
201.2 (7.92)
201.2 (7.92)
201.2 (7.92)
201.2 (7.92)
201.2 (7.92)
EGES-265-2
201
1.08 : 1
1.08 : 1
1.3 : 1
1.3 : 1
1.08 : 1
1.3 : 1
50 N·m (37 lbf·ft)
163 N·m (120 lbf·ft)
Retorque all bolts until no
movement
52 N·m (38 lbf·ft)
26 N·m (19 lbf·ft)
26 N·m (19 lbf·ft)
26 N·m (19 lbf·ft)
52 N·m (38 lbf·ft)
26 N·m (19 lbf·ft)
386 N·m (284 lbf·ft)
177 N·m (130 lbf·ft)
639 N·m (470 lbf·ft)
25 N·m (18 lbf·ft)
326 N·m (240 lbf·ft)
54 N·m (40 lbf·ft)
33 N·m (24 lbf·ft)
33 N·m (24 lbf·ft)
7 N·m (60 lbf·in)