Camshaft Disassembly - Navistar INTERNATIONAL DT 466 Service Manual

258
Figure 369 Removing camshaft gear
2. Using a socket or wrench apply force to tool until
gear is just about off. Use both hands to remove
cam gear and tool.

Camshaft Disassembly

NOTE: Use this procedure to remove the cam gear
and camshaft as a unit.
Figure 370 Removing camshaft thrust plate
bolts
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
CRANKCASE, CRANKSHAFT, AND CAMSHAFT
Follow all warnings, cautions, and notes.
© 2009 Navistar, Inc.
1. Remove the two camshaft thrust plate bolts (M8 x
20).
Figure 371 Removing the camshaft assembly
2. Carefully remove the camshaft assembly from the
crankcase.
EGES-265-2