Ansi/Ncsl Z540.3-2006 And Iso/Iec 17025 Verification - Keysight P937 A Series Service Manual

Tests, Adjustments, and Troubleshooting

ANSI/NCSL Z540.3-2006 and ISO/IEC 17025 Verification

ANSI/NCSL Z540.3-2006 and ISO/IEC 17025 Verification
To meet the criteria for ANSI/NCSL Z540.3-2006 and ISO/IEC 17025
verification, perform the preliminary checks and all performance tests without
stopping to repair or adjust.
completion of all the tests, even if you are aware that the network analyzer did
not pass. If there is a failure, complete the verification before you troubleshoot,
repair, and adjust. After the failure has been corrected, repeat the entire set of
performance tests and generate a new set of data.
Figure 3-1 ANSI/NCSL Z540.3-2006 and ISO/IEC 17025 Verification Flowchart
Keysight P937xA PXIe Service Guide
1. Stop only in case of a catastrophic failure or cable connector damage.
1
Refer to Figure 3-1 for test flow. Print data at the
31