Keysight P937 A Series Service Manual page 86

Removal and Replacement Procedures
Post-Repair Procedures
Go to Help> About Network Analyzer, you will need to provide Keysight with
the following information:
- model number
•
•
Instrument information is available in the USB network analyzer - on the
toolbar, click Help, then click About Network Analyzer. Refer to
Figure 5-9 About Network Analyzer Window
Step 18. Perform Operator's Check and Calibration
Operator's Check:
Perform the Operator's Check to check the basic functionality of the analyzer.
For instructions, refer to the
Troubleshooting."
If you experience difficulty with the basic functioning of the analyzer, contact
Keysight. Refer to
84
serial number
HostID
of the Service Guide.
"Keysight Support, Services, and Assistance" on page
Chapter 3, "Tests, Adjustments, and
Keysight P937xA PXIe Service Guide
Figure 5-9.
22.