Instrument Markings - Keysight P937 A Series Service Manual

Safety and Regulatory Information
Regulatory Information

Instrument Markings

Some instrument markings may not appear on your analyzer.
16
This symbol marks the ON position of the power line switch.
This symbol marks the ON position of the power line switch.
This symbol marks the standby position of the power line switch.
This symbol marks the OFF position of the power line switch.
This symbol marks the OFF position of the power line switch.
The instruction documentation symbol. The product is marked with this symbol when it
is necessary for the user to refer to the instructions in the documentation.
This symbol indicates separate collection for electrical and electronic equipment,
mandated under EU law as of August 13, 2005. All electric and electronic equipment
are required to be separated from normal waste for disposal (Reference WEEE
Directive, 2002/96/EC).
This symbol is used to identify a terminal which is internally connected to the product
frame or chassis.
The CE mark is a registered trademark of the European Community (if accompanied by
a year, it is the year when the design was proven). This product complies with all
relevant directives.
The Keysight email address is required by EU directives applicable to our product.
The CSA mark is a registered trademark of the CSA International.
Keysight P937xA PXIe Service Guide