Tests, Adjustments, And Troubleshooting Information In This Chapter; Before You Begin - Keysight P937 A Series Service Manual

Tests, Adjustments, and Troubleshooting
Information in This Chapter
Keysight P937xA PXIe Service Guide
3 Tests, Adjustments, and Troubleshooting
Information in This Chapter
This chapter contains procedures to help you check, verify, adjust, and
troubleshoot your network analyzer.
— The checks verify the operation of the assemblies in your network analyzer.
— The verification compares the operation of your analyzer to a gold standard.
— The adjustments allow you to tune your network analyzer for best
— The troubleshooting assists you in finding the cause of a failure.
Section Title

Before You Begin

About System
Verification and
Performance Tests
ANSI/NCSL Z540.3-2006
and ISO/IEC 17025
Verification
Non-Standards
Compliant Verification
performance.
Summary of Content
Items to consider or procedures to perform before testing is
begun:
—Verify the Operating Environment.
—Protect Against Electrostatic Discharge.
—Allow the Analyzer to Warm Up.
—Review the Principles of Connector Care.
Descriptions of:
—System Specifications
—Instrument Specifications
—System Verification Procedure
—Performance Tests
—Certificate of Calibration
The ANSI/NCSL Z540.3-206 and ISO/IEC 17025 process of
verifying your network analyzer.
The Non-Standards Compliant process of verifying your
network analyzer.
25
Start Page
page 27
page 28
page 31
page 32