Configure Network Settings; Configure Sip Interface Settings - Avaya J100 Series Partner Configuration Manual

in the next section. For parameter description, see the Installing and Administering Avaya J129 IP Phone
in third-party call control setup for J129.

1.1.1 Configure Network Settings

Step
Step 1
Step 2
Step 3
Step 4
Step 5

1.1.2 Configure SIP Interface Settings

Step
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Step 18
Step 19
Step 20
Step 21
Step 22
Step 23
Command
SET ENABLE_UDP_TRANSPORT 1
SET DNSSRVR "8.8.8.8"
SET DOMAIN ""
SET SNTPSRVR pool.ntp.org
SET SNTP_SYNC_INTERVAL 144000
Command
"3cx.hcm.com"
SET SIPDOMAIN
SET SIP_CONTROLLER_LIST "3cx.hcm.com:5060;transport=tcp" (or udp,
tls)
SET ENABLE_G711A 1
SET ENABLE_G711U 1
SET ENABLE_G722 1
SET ENABLE_G726 0
SET G726_PAYLOAD_TYPE 110
SET ENABLE_G729 1
SET ENABLE_OPUS 0
SET SEND_DTMF_TYPE 2
SET DTMF_PAYLOAD_TYPE 120
SET 100REL_SUPPORT 1
SET PLAY_TONE_UNTIL_RTP 1
SET SYMMETRIC_RTP 1
SET REGISTERWAIT 1200
SET WAIT_FOR_UNREGISTRATION_TIMER 32
SET WAIT_FOR_INVITE_RESPONSE_TIMEOUT 60
SET FAILED_SESSION_REMOVAL_TIMER 30
SET TCP_KEEP_ALIVE_STATUS 1
SET TCP_KEEP_ALIVE_TIME 60
SET TCP_KEEP_ALIVE_INTERVAL 10
SET SIP_TIMER_T1 500
SET SIP_TIMER_T2 4000
6