3001 Removal Procedure - Xerox 3001 Service Manual

3001 Removal Procedure
If the Install becomes an abort, or if the 3001.
,,
OFF THE
must be moved to a different location and
repacked, the following procedures will be
POWER SWITCH AND DISCONNECT THE
necessary.
POWER CORD.
2. REMOVE THE XEROGRAPHIC MODULE
(REP 9.1).
3. REMOVE THE DUSTING POUCH AND PLACE
IT IN THE INSTALLATION KIT.
To avoid damaging the photoreceptor,
the 3001 must be shipped with the
cleaning blade not touching the
photoreceptor.
4. (FIGURE 1): INSTALLA TIE-WRAP ON THE
SOLENOID WEIGHT.
A '
INSTALL TIE-WRAP
Figure 1. Install a Tie-Wrap on the Solenoid
Weight
12/98
3001 Removal
6-36
3001