Xerox 3001 Service Manual page 327

5. (FIGURE 2): REMOVE THE UPPER REAR
COVER.
LOOSEN (2) 114TURN
B
REMOVE THE
UPPER REAR COVER
Figure 2. Remove the Upper Rear Cover
6. (FIGURE 3): TAPE AND REMOVE THE DRY
INK PLUS CARTRIDGE.
7. REMOVE THE DEVELOPER MODULE (REP
9.5).
Q
STEP 6 A: Tape the Dry Ink Plus
Cartridge before removing the
cartridge from the Developer
8. PLACE A DROP CLOTH ON THE FLOOR.
9. REMOVE THE PICKOFF BAFFLE AND STORE
IT IN A SAFE PLACE TO AVOID DAMAGING
IT.
INSTACEAPE
OVER THE
I
HOLES (ENTIRE LENGTH)
Figure 3. Tape and Remove Dry Ink Plus
Cartridge
Do not turn the Developer Module
in the vertical position. This may
cause developer to get into the
toner cartridge clutch in the end of
the Developer Module.
1 2/98
3001 6-37
3001 Removal