Xerox 3001 Service Manual page 191

(Continued)
Q Before removing
the
Media
Transport
6. (FIGURE 4): REMOVE THE MEDIA
Assembly, ensure that there
is a
clean
TRANSPORT ASSEMBLY.
area t o place the assembly.
5. (FIGURE 3): PREPARE TO REMOVE THE
MEDIA TRANSPORT ASSEMBLY.
VIEW FROM REAR
k f ' *
REMOVE THE PIN
Figure 3. Prepare to Remove the Media Transport
Assembly
- -
--
TRANSPORT
MODULE WHILE
DOING THE STEP B
Figure 4. Remove the Media Transport Assembly
(Continued)
12/98
3001 4-11
REP 8.1