Final Action - Xerox 3001 Service Manual

Final Action
1. Make a record of the copy count meter
in the service log.
2. Make one light dusting (input
document without an image) copy.
3. Make one 36 X 24 (Al) copy of test
pattern
82E5980
in copy normal mode.
4. Perform the Image Quality Analysis
located i n Section 3.
5. Make a copy at each of the following
Copy Contrast settings:
A. Lightest
B. Darkest
C. Normal (center position)
6. Compare the copies for differences in
image darkness. If t w o or more copies
are the same, go t o the CQ 25
Developer Bias RAP located in Section 3.
7. Check that the copy count meter has
advanced.
8.
Record all activities in the service log.
12/98
3001 1-13
Final Action