Rep 9.4 Cleaner Blade - Xerox 3001 Service Manual

REP 9.4 CLEANER BLADE
PARTS LIST ON PL 9.3
REMOVAL
1.
WARNING: DISCONNECT THE POWER
CORD.
2. REMOVE PHOTORECEPTOR DRUM
ASSEMBLY (REP 9.2).
3. (FIGURE 1): REMOVE TRANSITION GEAR
AND WEIGHT.
Q
STEP 3 A: The cleaner blade assembly is
spring loaded. Use care when
removing the transition gear.
AQ
(
REMOVE
Figure 1. Remove Transition Gear and Weight
4. (FIGURE 2): REMOVE THE CLEANER BLADE
ASSEMBLY.
OVE
B
EMOVE CLEANER
\ \ \
BLADE ASSEMBLY
5. (FIGURE 3): REMOVE THE CLEANER
BLADE
REMOVE THE
/
\
CLEANER BLADE
Figure 2. Remove the Cleaner Blade
Assembly
A
REMOVE BLADE
SEAL ASSEMBLY
RETAINERS (3)
Figure 3. Remove the Cleaner Blade
12/98
REP 9.4
4-26 3001