Copying procedure
Quick Pathway
À
Load documents.
À
Press [Features].
À
If necessary select
[Copy].
À
Select the Copy
features required.
1. Load the documents
Page 3-2
Before making copies on the DC440/432/420 , identify what is
to be copied and the number of copies required. Use the
following steps to make a copy using the Document Centre .
NOTE: If the Auditron has been enabled on the machine, an
account number may be required before programming can
commence. For account allocation, or further information
about the Auditron, please contact the Key Operator.
A choice of document input areas is available. These are:
- A document feeder for single or multiple documents
- A document glass for single documents or bound
originals.
Document Feeder
Up to 50 documents can be scanned at one time using the
document feeder. Ensure the documents are of the same size,
in good condition and all staples or paper clips removed.
Documents should be 16 - 32lb (substance 16 - 32) and 8 1/2"
x 5 1/2" through 8 1/2" x 11" long edge feed or 5 1/2" x 8 1/2"
through 11 x 17" short edge feed.
NOTE: If feeding Computer Fan Fold through the Document
Feeder always remove the perforated feed edge first.
NOTE: For information about copying mixed size originals
using the document feeder please refer to page 3-22. For
instructions on faxing mixed size originals using the document
feeder refer to page 4-34 .
Xerox Document Centre 440/432/420 User Guide