Configuration; Tcp/Ip (Lpd/Port 9100); Preparations; Configuration Procedure - Xerox 4590 System Administration Manual

TCP/IP (LPD/Port 9100)

Preparations

Configuration procedure

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
2.

Configuration

The following items are required when using TCP/IP (LPD/Port
9100) protocol on the machine.
• A network environment where TCP/IP can be used.
• The "CentreWare Utilities" CD-ROM, which is included with
this product.

Overview

The machine can be connected to computers using TCP/IP
(LPD/Port 9100) protocol.
The following is the procedure to use TCP/IP(LPD/Port 9100)
protocol.
• Configuration on the Machine: Configure TCP/IP (LPD/Port
9100) on the machine.
• Configuration on the Computer: Install the print driver.
2-1