Installation Procedure - Xerox DocuColor DocuColor 4 Setup Manual

1.4 Printer Installation Procedure
1.4 Printer Installation Procedure
1
1. Install the Multi Purpose Tray (Manual Tray).
2. Install the Face-Up Tray.
3. Remove the protective tape from the Dry Ink Cartridge.
4. Install the Dry Ink Cartridges.
5. Remove the spacers from the Manual Feed Unit.
6. Install the Oil Roll Cartridge.
7. Load paper.
8. Connect the Power Cord.
9. Turn the power ON.
10. Run a test print.
11. Turn the power OFF.
Spacers are installed in various locations for protection against shock and
vibration during shipment. Referring to the following procedure, be sure to
remove all of the spacers.
If you have purchased the optional cabinet for the printer, install the printer
onto the cabinet first. For details regarding installation of the cabinet, refer to
the literature supplied with the cabinet.
8