Product Demonstration - Xerox 3001 Service Manual

30. PERFORM THE ELECTROSTATIC SERIES
(ADJ 9.2).
32. MAKE FIVE COPIES AND CHECK THE COPY
QUALITY.
33. PERFORM THE FOLLOWING
ADJUSTMENTS:
A. TIMEOUT INTERVAL TO REST
MODE (ADJ 3.1)
B. TIMEOUT INTERVAL TO POWER
SAVER MODE (ADJ 3.2)
C. COUNTRY CONFIGURATION (ADJ
3.3)
D. COPY SIZE ADJUSTMENT (ADJ 5.1)
E.
REGISTRATION (ADJ 8.1)
F.
LEAD EDGE MARGIN (ADJ 8.2)
35. SEPARATE THE First Call Report 3001
CARD FROM THE installation Quality
Report 3001 CARD AND l NSERT THE First
Call Report 3001 CARD l NTO THE
MACHINE LOG POUCH.
36. RECORD THE FOLLOWING ON THE COPIER
Installation Quality Report 3001 CARD:
COPY COUNT READING
COPIER SERIAL NUMBER
INSTALL DATE
COMMENTS (AS REQUIRED)
37. MAIL THE COPIER installation Quality
Report 3001 CARD.
38. RECORD THE DEVELPER BATCH NUMBER
ON THE SERVICE LOG.
39. IF THE OPTIONAL 3001 AUDITRON KIT IS
PROVIDED WITH THIS INSTALLATION, USE
THE INSTRUCTION PROVIDED IN THE KIT
TO INSTALL IT AT THIS TIME.
A. LOCATE THE INDIVIDUAL
RESPONSIBLE FOR THE COPIER AND
GIVE THEM THE 3001 AUDITRON
ADMINISTRATOR GUIDE. ASK THAT
THEY PLEASE READ THROUGH THE
MANUAL WHILE YOU INSTALL THE
AUDITRON. THISSHOULD BE DONE IN
ORDER TO BEGIN THE AUDITRON
ADMINISTRATOR TRAINING.
Product Demonstration
To demonstrate the capabilities o f the 3001,
refer t o the User Guide. Perform the
following procedures t o train an operator (s):
1. Getting To Know Your Copier
2. Control Panel
3. Making The Copies i n multiple copy
and Long Copy mode. when t o use
them.
4. ScaleAdjust
5. Partial
Copy
4. Document Input1 Copy Contrast
5. The Copy Output Selections
6. Adding The Dry Ink and how t o clear
the 11 status code
7. Auditron
a. Show the operator (s), that w i t h the
Auditron enabled, the C9 code will be
displayed on the Control Panel until a
valid number is entered.
b. Tell them that the # key must be
pressed after entering their Account
Code number.
8. Cleaning the Platen and the Optical
System
9. Problem Solving Status Codes
10. Clearing the Copier
(Continued)
12/98
3001 Installation
6-34
3001