Xerox 3001 Service Manual page 315

25. (FIGURE 15): INSTALL THE RIGHT SIDE OF 26. RAISE THE FRONT COVER.
THE OIL DISPENSE ASSEMBLY.
27. RAISE THE TRANSPORT LATCHING COVER.
STEP
25
A: To avoid damage to the
stripper fingen and the fuser heat roll, 28. RAISE THE FEED-IN SHELF.
I
keep the oil dispense assembly as dose
O
to the fusrr roll without touching the
roll while installing the assembly.
L
-
ATTACH THE SPRING
(2) ONE EACH END
29. (FIGURE 16): REMOVE THE UPPER REAR
COVER.
A
LOOSEN (2) 114 TURN
B
C
I
REMOVE
Figure 16. Remove the Upper Rear Cover
30. (FIGURE 17): REMOVE THE DRY INK
PLUS CARTRIDGE.
Figure 15. Installing the Oil Dispense Assembly
Figure 17. Remove the Dry Ink Cartridge
12/98
3001 6-25
3001 Installation