Maintenance Procedures - Xerox 3001 Service Manual

DOCUMENT HANDLER
INTERVAL
Task
Clean the platen
Clean lower
document feed rolls
and optics cavity
Clean the exposure
lamp lens
Inspect the idler
rolls
Reason
- -
Task Enabler
Spots on platen result in lines on copy. dust
and other contaminents lower light
transmission.
Clean both sides of platen with anti static cleaner on a
white cloth.
Dirty feed rolls can cause original t o slip.
contaminants i n optics can cause C.Q.
defects.
Clean using the Formula "A" on a towel or cloth.
Contamination on lamp and lens result in
C.Q. defects.
Binding can cause the document drive t o
stall,resulting in a larger than acceptable
COPY-
Apply a small amount of anti-static cleaner t o a towel.
Check the tape on the lens, repair or replace as neccessary.
Idler rolls should turn freely. replace as required.
(Continued)
Document Handler Maintenance Procedures