Xerox 3001 Service Manual page 209

(Continued)
REPLACEMENT
1.
(FIGURE 3): CLEAN THE DEVELOPER FROM
THE MAGNETIC ROLL.
Do not install the toner cartridge until
the Developer Module is installed.
MODULE TO RESTON THE
BAR AND HOLD WHILE
ROTATE THE GEAR TWO
DOING THE STEPS B, C AND D
MORE REVOLUTIONS TO
REMOVE THE REMAINDER OF
THE DEVELOPER
ROTATE THE GEAR UNTIL
THE DEVELOPER I S
CLEARED FROM THE
MAGNETIC ROLL
MAGNETIC ROLL
L
WIPE YOUR FINGER
ACROSS THE ENTIRE
LENGTH OF THE
SURFACE
Figure 3. Clean the Developer from the Magnetic Roll
(Continued)
REP 9.5