Rep 8.1 Media Transport Module - Xerox 3001 Service Manual

REP 8.1 MEDIA TRANSPORT
MODULE
PARTS LIST ON PL 8.1
REMOVAL
A
DISCONNECT
THE PlJ28
AND PlJ73
I.
REMOVE THE LEFT AND RIGHT SIDE
4. (FIGURE 2): REMOVE THE RETAINING CLIP.
COVERS, THE UPPER AND LOWER REAR
COVERS AND THE SEPARATOR GUIDES.
2. REMOVE THE XEROGRAPHIC MODULE
(REP 9.1).
3. (FIGURE 1): PREPARE TO REMOVE THE
MEDIA TRANSPORT MODULE.
B
DISCONNECT THE
COROTRON LEADS
Figure 1. Prepare
to
Remove the Media Transport Module
\
REMOVE THE
PWB
Figure 2. Remove the Retaining Clip
(Continued)
1 2/98
REP 8.1
4-1
o
3001