Xerox 3001 Service Manual page 11

Refer to the Change TagIMOD Index
Q
for information on how to determine
whether or not a copier has a particular
TagIMOD number.
FOR EXAMPLE:
THERMISTOR (RTI ) REPAIR PROCEDURE
WARNING
1. Switch off the copier and disconnect
the power cord.
W/ TagIMOD 5: Remove the
Xerographic Module.
In the step
1,
the WI TaglMOD 5 statement
refers t o the modification number
5.
If the
copier
that is
being serviced does have
TagIMOD 5, perform this step.
If the copier does not have TagIMOD number
5, ignore the W I TaglMOD 5 instruction. In this
situation, do not remove the xerographic
module.
2. Lower the transport latching cover.
3. Lower the front cover
In the steps 2 and 3, no reference is made t o
either the with or without TagIMOD 5
modification. Therefore, perform the
instructions whether the copier has or does
not have TagIMOD
5.
Introduction