Xerox 3001 Service Manual page 202

(Continued)
Q Before removing the Xerographic
Module, ensure that there is a clean flat
surface area to place the assembly.
6. (FIGURE 4): REMOVE THE XEROGRAPHIC
MODULE
0
The Fuser may be hot. Use a cloth when
supporting the center of the module.
Cover the Photoreceptor Drum with a
light shield to prevent damage.
0
STEP 6 D: The module is heavy and i t is
difficult t o handle. Be careful when
removing the module.
1 2/98
REP 9.1
4-22
3001