Activating Fax Ports And Features; Introduction; Important Note - NEC NVM-2000WS Instructions For Installing And Activating

Activating Fax Ports and Featur es

Introduction

Introduction
Tools & Materials Needed for Activating Fax Ports/Features

Important Note

Issue 1-0
This supplement provides information for installing and activating Fax ports and the Fax features in
the NVM-2000WS and the NVM-Server XL.
These Voice Mails use the D/41 JCT-LS Card (P/N 17702) to provide fax ports.
To use the Fax Card, you need to install a feature activation kit (which contains a disk and a dongle)
to activate the Fax ports.
You will also need to add the Fax Mail feature to your Voice Mail. To add any of the Fax features
(Fax Mail, Fax-On-Demand or Fax Server), you will need to install feature software and a dongle.
You will need the following tools and materials:
a NVM-2000WS or NVM-Server XL Voice Mail System installed and running.
a Fax Card (P/N 17702-2P or 17702-4P), the corresponding Feature Activation disk and dongle
Fax Mail Software (also Fax-On-Demand) (P/N 17725) OR Fax Server Software (Fax Server
Software includes Fax Mail) (P/N 17724) for a system that does not currently have Fax
installed. The Fax software contains a disk and dongle.
the Voice Mail Server Software Installation CD (distributed with your Windows 2000 Voice
Mail Server)
NEC document titled, Windows 2000 Platform Description and Installation Instructions (P/N
17700INS02 or higher) You will need to perform various procedures in this document before
you begin the instructions in this supplement.
an ESD Wrist Strap (to be worn on the wrist and attached to a grounded metal object at all times
when handling cards)
a Phillips-head screw driver.
Keep the card in its anti-static container, when it is not being used.
Perform all card-handling on a work surface covered with
dissipating material.
All work must be performed by a qualified technician.

Activating Fax Ports and Features

Introduction
(
or composed of) a grounded, static-
1