SERVICE MANUAL
Caution
Do not tighten the SCREWS excessively.
[8] Tighten the 4 SCREWS.
[9] Use the procedure on Page 21 to adjust the tension of the MAIN DRIVE CHAIN.
[10] Tighten the 4 MOUNTING SCREWS.
[11] Install the CHAIN GUARD.
DRYER HEATER
Adjusting the Temperature
DRYER
TEMPERATURE
CONTROL
KNOB
24
Factors which determine the correct temperature are:
• condition of the air
• amount and type of the film
Use the lowest temperature necessary to dry the film.
[1] Rotate the DRYER TEMPERATURE
CONTROL KNOB to adjust the temperature:
H172_1065ACA
H172_1065AC
Important
• clockwise to increase the temperature
• counterclockwise to decrease the temperature
12JAN99 – 7C8772