O-Ring In The Recirculation Pump - Kodak X-Omat 2000 Service Manual

Caution
Do not operate the RECIRCULATION PUMP if the TANKS are empty.
[14] Actuate the RECIRCULATION PUMP.
[15] Check for:
• agitation of the water in the TANK
• leakage
[16] Drain the water from the DEVELOPER TANK and the FIXER TANK.
[17] Fill the DEVELOPER TANK and the FIXER TANK with the correct solution.

O-RING in the RECIRCULATION PUMP

Warning
Dangerous Voltage
[1] Disconnect the main power.
[2] Disconnect the water supply to the PROCESSOR.
[3] Remove:
• TOP COVER
• 2 SIDE PANELS
[4] Install PINCH CLAMPS on the TUBING to the RECIRCULATION PUMP to prevent leakage of solution.
7C8772 – 12JAN99
Adjustments and Replacements
41