SERVICE MANUAL
[7] Remove:
• THRUST WASHER
• SPROCKET
• SPACER
[8] Reverse the steps to install a new DRIVE ROLLER and DRIVEN ROLLER.
DRYER RACK
Adjustment for Squareness
smooth, flat surface
[3] Loosen the TIE ROD SCREWS and NUTS.
[4] Press down on the SIDE PLATES so that the SIDE PLATES make uniform contact with the flat surface.
[5] Tighten the TIE ROD SCREWS and NUTS.
14
[1] Remove the RACK from the PROCESSOR.
[2] Place the CROSSOVER AY on a smooth, flat
surface.
H172_1042AA
TIE ROD
2 TIE ROD
SCREWS
2 SIDE PLATES
12JAN99 – 7C8772
2 NUTS
H172_1043BCA
H172_1043BA