Rack Replacements; Drive Chain - Kodak X-Omat 2000 Service Manual

RACK Replacements

DRIVE CHAIN

TURNAROUND
ASSEMBLY
HOOK
7C8772 – 12JAN99
SIDE PLATE
DRIVE
GEAR
ADJUSTING
4
SCREWS
4 HOLDING
SCREWS
LINK
DRIVE CHAIN
H172_1041CCA
H172_1041CA
Adjustments and Replacements
[1] Use a SCREWDRIVER to pry open the HOOKS
of a LINK.
[2] Connect the new DRIVE CHAIN to the old
DRIVE CHAIN. Make sure the HOOKS and the
openings of the LINKS are in the correct
direction.
[3] Pull the old DRIVE CHAIN through the RACK
AY until the new DRIVE CHAIN is in the correct
position.
[4] Remove the old DRIVE CHAIN.
[5] Connect the ends of the new DRIVE CHAIN.
[6] Use the procedure on Page 10 to adjust the tension
of the DRIVE CHAIN.
11