Gs : Start/End Macro Definition - SNBC BTP-R580II Programming Manual

Hide thumbs

Table Of Contents

Table of Contents

0, 48

1, 49

• The high level time is [t1 × 2 ms] and the low level time is [t2 × 2 ms].

• If t2 < t1, the low level time is [t1 × 2 ms].

[Relative]

DLE DC4

GS ( A pL pH n m Execute test printing

[Function]

Execute test printing.

[Format]

ASCII

Hex

Decimal 29

[Range]

(pL+( pH × 56))=2 (pL=2, pH=0)

0 ≤ n ≤ 2, 48 ≤ n ≤ 50

1 ≤ m≤ 4, 49 ≤ m ≤ 52

[Notes]

m decides printing data:

• This command is enabled only when processed at the beginning of the line in

standard mode.

• This command is disabled in page mode.

• If this command is received in the process of macro definition, the printer will stop

macro definition and execute this command.

• The printer resets automatically after executing this command.

• The printer will cut paper after completing executing this command.

• When executing this command, the printer is busy, so it does not receive other

commands.

• When m = 4, the printer executes this command. After some paper feed amount, a

diagnostic threshold is calculated, which is used for functions like page orientation.