Fs C N - SNBC BTP-R580II Programming Manual

A1H ≤ c2 ≤ FEH
0 ≤ d ≤ 255
k = 72
[Notes] c1 and c2 indicate character codes for the user-defined Chinese characters. c1
specifies the first byte, and c2 specifies the second byte..
d indicates the dot data. Set a corresponding bit to 1 for printing a dot or to 0 for not
printing a dot.
[Default] No user-defined Chinese characters.
[Relative] FS C
The relationship between user-defined Chinese font and data:

FS C n

[Function] Select Japanese character mode.
[Format] ASCII
Hex
Decimal 28
[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Notes] Select Japanese character mode according to the values of n:
FS C n
1C 43 n
67 n
n
0,48
1,49
BTP-R580II Programming Manual
Code mode
JIS code
SHIFT JIS code
- 31 -