Esc ? N Cancel User-Defined Characters; Esc E N Select/Cancel Emphasized Mode; Esc G N Select/Cancel Double-Strike Mode - SNBC BTP-R580II Programming Manual

ESC ? n Cancel user-defined characters

[Function] Cancel user-defined characters.
[Format] ASCII
Hex
Decimal 27
[Range] 32 ≤n < 127
[Notes] • Cancel the character with n as code in user-defined characters. After canceling the
character, the corresponding character in the internal character set will be used.
• If there is no character with n as code in the user-defined characters, the command
will be ignored.
[Relative] ESC &, ESC %

ESC E n Select/Cancel emphasized mode

[Function] Select/Cancel emphasized mode.
[Format] ASCII
Hex
Decimal 27
[Range] 0 ≤ n ≤ 255
[Notes] • When the least significant bit of n is 0, emphasized mode is cancelled.
• When the least significant bit of n is 1, emphasized mode is selected.
• Only the least significant bit of n is enabled.
• Emphasized mode can also be selected/cancelled via using ESC !. The last received
command is enabled.
[Default] n = 0
[Relative] ESC !
[Example] 1B 40
1B 45 01 (Emphasized mode is selected)
41 41 41 41 41 0A
1B 45 00 (Emphasized mode is not selected)
42 42 42 42 42 0A
Result:

ESC G n Select/Cancel double-strike mode

[Function] Select/Cancel double-strike mode.
[Format] ASCII
ESC ? n
1B 3F n
63 n
ESC E n
1B 45 n
69 n
ESC G n
BTP-R580II Programming Manual
- 22 -