SNBC BTP-R580II Programming Manual page 49

• Even if the printer is disabled by ESC =, the printer still performs ASB according to
the settings set by this command.
• The returned status information is as follows:
First byte (Printer information)
Bit Off/On
0 Off
1 Off
Off
2
On
Off
3
On
4 On
Off
5
On
Off
6
On
7 Off
Second byte (printer information)
Bit Off/On
0 -
1 -
2 -
Off
3
On
4 Off
Off
5
On
Off
6
On
7 Off
Bit 5: Errors like paper jam are recoverable errors. These errors can be eliminated
and the printer can return to normal by using DLE ENQ n (1 ≤ n ≤ 2). Errors like
control board damage are irrecoverable errors.
Bit 6: Errors like print head overheating are automatically recoverable errors. When
printing is stopped due to these errors, the printer can return to normal automatically.
Third byte (paper sensor information)
Bit Off/On
Off
0,1
On
Off .
2,3
On .
Hex Decimal
00 0
00 0
00 0
04 4
00 0
08 8
10 16
00 0
20 32
00 0
40 64
00 0
Hex Decimal
- -
- -
- -
00 0
08 8
00 0
00 0
20 32
00 0
40 64
00 0
Hex Decimal
00 0
03 3
00 0
0C 12
- 42 -
BTP-R580II Programming Manual
Printer status
Not used, fixed to 0.
Not used, fixed to 0.
Drawer kick-out connector pin 3 is
LOW.
Drawer kick-out connector pin 3 is
HIGH.
On-line.
Off-line.
Not used, fixed to 1.
Top cover is closed.
Top cover is open.
Paper is not being fed by using
the PAPER FEED button.
Paper is being fed by using the
PAPER FEED button.
Not used, fixed to 0.
Printer Status
Undefined.
Undefined.
Undefined.
No cutter error.
Cutter error occurs.
Not used, fixed to 0.
No recoverable error.
Recoverable error occurs.
No automatically recoverable
error.
Automatically recoverable error
occurs.
Not used, fixed to 0.
Printer Status
Paper is not near end.
Paper near end.
Paper presence.
Paper end.