Esc M N Select Character Font; Esc R N Select An International Character Set - SNBC BTP-R580II Programming Manual

Hex
Decimal 27
[Range] 0 ≤ n ≤ 255
[Notes] • When the LSB of n is 0, double-strike mode is cancelled.
• When the LSB of n is 1, double-strike mode is selected.
• Only the least significant bit of n is valid.
• This command has same printing effect with emphasized.
[Default] n = 0
[Relative] ESC E
[Example] Refer to ESC E

ESC M n Select character font

[Function] Select character font
[Format] ASCII
Hex
Decimal 27
[Range] 0 ≤ n ≤3, 48 ≤n ≤ 51
n
0,48
1,49
2,50
3,51
[Example] 1B 40
1B 4D 01 (Compressed font is selected)
41 41 41 42 42 42 30 30 30 31 31 31 0A
1B 4D 00 (Standard font is selected)
41 41 41 42 42 42 30 30 30 31 31 31 0A
Result:

ESC R n Select an international character set

[Function] Select an international character set
[Format] ASCII
Hex
Decimal 27
[Range] 0 ≤ n ≤ 13
[Notes] Select the corresponding international character set of n from the following table:
1B 47 n
71 n
ESC M n
1B 4D n
77 n
Select standard ASCII font (12 × 24)
Select compressed ASCII font (9 × 17)
Select user-defined character
Select Chinese font (24 × 24)
ESC R n
1B 52 n
82 n
n
0
1
BTP-R580II Programming Manual
Function
Character set
U.S.A.
France
- 23 -