Disassemble The Paper Near End Sensor; Disassemble The Power Switch - SNBC BTP-2002NP Service Manual

Confidential

4.2.13 Disassemble the Paper Near End Sensor

1
2

4.2.14 Disassemble the Power Switch

1
2
3
4
Pictures
Pictures
Remove the four screws.
Take off the paper near-end sensor modules.
Cut off the clip with wire clamp pliers.
Remove the glue with a screw driver (line type).
Clamp the stretch slices.
Pull out the power switch.
- 13 -
BTP-2002NP Service Manual
Instructions
Instructions