Bitmap Commands; Esc * M Nl Nh D1 - SNBC BTP-R580II Programming Manual

[Format] ASCII
Hex
Decimal 28
[Range] 0 ≤ n ≤ 255
[Notes] • When the LSB of n is 0, quadruple-size mode for Chinese characters is cancelled.
•·When the LSB of n is 1, quadruple-size mode for Chinese characters is selected.
• Only the least significant bit of n is valid.
• In quadruple-size mode, the size of the characters is the same as when double-width
and double-height modes are both selected.
• When quadruple-size mode is cancelled, the following printed characters are in
normal size.
• When some of the characters in one line are different in height, all the characters in
the line are aligned at the baseline.
• FS ! or GS ! (select double-height and double-width modes) can also select or cancel
quadruple-size mode, and the setting of the last received command is effective.
[Default] n = 0
[Relative] FS !, GS !

2.4 Bitmap Commands

ESC * m nL nH d1... dk Select bitmap mode
[Function] Select bitmap mode.
[Format] ASCII
Hex
Decimal 27
[Range] 0 ≤ m ≤ 1, 48 ≤ m ≤ 49
0 ≤ nL ≤ 255
0 ≤ nH ≤ 3
0 ≤ d ≤255
[Notes] Select a bitmap mode specified by m with the number of dots specified by nL and nH,
as follows:
m
0
1
32
33
• If the value of m is outside the specified range, nL and the following data are
processed as normal data.
• nL and nH specify the number of print dots in horizontal direction. The total number of
dots is nL + nH × 256.
FS W n
1C 57 n
87 n
ESC * m nL nH d1...dk
1B 2A m nL nH d1...dk
42 m nL nH d1...dk
Mode
8-dot single-density
8-dot double-density
24-dot single-density
24-dot double-density
Vertical Direction
Number of Dots Resolution
8 203/3 DPI
8 203/3 DPI
24 203 DPI
24 203 DP
- 33 -
BTP-R580II Programming Manual
Horizontal Direction
Resolution Number of Data (K)
101 DPI nL + nH × 256
203 DPI nL + nH × 256
101 DPI ( nL + nH × 256) × 3
203 DPI ( nL + nH × 256) × 3