Gs # N Define Current Downloaded Bitmap Number - SNBC BTP-R580II Programming Manual

• Data of the bitmap exceeding the current area will be ignored.
• d indicates the bitmap data. Set a corresponding bit to 1 to print a dot, or to 0 not to
print a dot.
• After completing the transmission of bitmap data, the printer returns to normal data
processing mode.
• This command is not affected by other print modes (emphasized, double-strike,
underline, character enlargement and white/black reverse printing), except for
upside-down print mode.
• The relationship between the data and the dots to be printed is as follows:
When 8-dot density is selected:
When 24-dot density is selected:

GS # n Define current downloaded bitmap number

[Function] Specify a number for the bitmap to be downloaded. This number is to be used when
downloading and printing this bitmap.
[Format] ASCII
Hex
Decimal 29
[Range] 0 ≤ n ≤ 7
GS # n
1D 23 n
33 n
BTP-R580II Programming Manual
- 34 -