Related Manuals for SNBC BTP-R180II
Summary of Contents for SNBC BTP-R180II
-
Page 1: Receipt Printer
USER’S MANUAL Receipt Printer BTP-R180II Shandong New Beiyang Information Technology Co., Ltd... -
Page 2: Warnings And Cautions
Information in this document is subject to change without notice. SHANDONG NEW BEIYANG INFORMATION TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”) reserves the right to improve products as new technology, components, software, and firmware become available. If users need further data about this product or have any doubt about safety issues that might arise from using it, please feel free to contact SNBC or your local agents. -
Page 3: General Safety Information
BTP-R180II User’s Manual General Safety Information Before installing and using the printer, please read the following items carefully. 1. Safety instructions Don’t touch the tear bar of printer. The print head is a thermal element and it is at high temperature during printing or just after operation, therefore please do not touch it and its peripherals for safety reasons. -
Page 4: Table Of Contents
BTP-R180II User’s Manual Contents 1 Introduction ..............................- 1 - 1.1 Outline ..............................- 1 - 1.2 Features .............................. - 1 - 2 Specifications ............................. - 2 - 2.1 Main specification ..........................- 2 - 2.2 Cutter Specification ..........................- 3 - 2.3 Paper Specification .......................... - Page 5 BTP-R180II User’s Manual 4.8.1 Power on printer ......................... - 11 - 4.8.2 Print self-test page ........................- 11 - 5 Printer maintenance ..........................- 12 - 5.1 Print head and roller cleaning ......................- 12 - 5.2 Mark sensor cleaning ........................- 12 - 5.3 Clear paper jam ..........................
-
Page 6: Introduction
1 Introduction 1.1 Outline BTP-R180II is a high performance thermal printer, which can be widely used for real-time printing application, such as POS system, restaurant system, ATM, etc. BTP-R180II can be connected with other devices via parallel interface, serial interface, USB, Ethernet and is available for WINDOWS 2000/XP/Server 2003/VISTA/WIN7/WIN8/Server2008 and Linux. -
Page 7: Specifications
BTP-R180II User’s Manual 2 Specifications 2.1 Main specification Item Specification Color Black or Ivory Print Method Direct Thermal Resolution 180 × 180 DPI(standard) Paper width 57.5/69.5/76/80/82.5mm Print width Max. 72mm Printing Print speed Standard: Max 200mm/s Flash capability 2M / 4M (selectable, according to different font library) Flash LOGO Max. -
Page 8: Cutter Specification
BTP-R180II User’s Manual Operation condition 5° C to 45° C, 20% to 90%RH (40° C) Storage condition -40° C to 60° C, 20% to 93%RH (40° C) Dimension 195 L x 145 W x 141 H (mm) Weight Approx 1.45Kg... -
Page 9: Mark Paper
Don’t use or store paper under high temperature, high humidity and strong light conditions. 2.3.2 Mark paper In mark paper mode, BTP-R180II determines the cut position and the initial printing position by referencing the position of the black mark. Black marked paper should meet the following requirement besides that of standard paper. -
Page 10: Print And Tear Off Position
BTP-R180II User’s Manual 2.4 Print and tear off position 2.4.1 Print position L1: Paper holder width: 83.5± 0.5mm L2: Max Print width: 72mm L3: Distance between left end of print-head and left side of paper house (Fixed) 1.75± 1mm ... -
Page 11: Outline And Components
BTP-R180II User’s Manual 3 Outline and components 3.1 Outline and Parts 1—Power LED 2—Error LED 3—Feed button 4—Tear bar 5—Top cover latch 6—Cutter cover 7—Middle cover 8—Power switch 9— Bottom cover 10—Top cover 11—Top-cover-open sensor 12—Paper sensor 13—Paper guide 14—Printer platen 15—Power connector... -
Page 12: Error Led And Buzzers
BTP-R180II User’s Manual Printer will stay in pause state after cutting paper (ERROR LED flashes).Then keep pressing FEED button, the printer will enter button config mode. d- Power switch (8) “O” power is to turn off printer. “—” power is to turn on printer. -
Page 13: Installation
Check whether all items, which are listed on the packing list, are present and in a good condition. If any item is damaged or missing, please contact your dealer. 4.2 Printer installation The BTP-R180II can be installed in two positions: horizontally on a table or vertically on a wall. Horizontally on a table Vertically on a wall 4.3 Connecting the Power Adapter... -
Page 14: Connecting Interface Cable
BTP-R180II User’s Manual causing a risk of fire or electric shock. When the printer is not in use for a long period of time, disconnect the Power adapter from the wall outlet for safety. 4.4 Connecting interface cable 1) Confirm the power switch is turned off. -
Page 15: Paper Near End Adjustment
4.7 Paper near end adjustment 4.7.1 Paper near end position adjustment BTP-R180II supports printing both in horizontal and vertical positions. Users can detect the remaining paper in the horizontal and vertical position by adjusting the paper near end sensor. The default printer setting is for horizontal printing and the paper near end sensor is at the bottom of the paper compartment. -
Page 16: Remaining Paper Amount Adjustment Of Paper Near End Sensor
BTP-R180II User’s Manual button in position 1 along the direction of the arrow. Then rotate thumbwheel in the direction shown. The paper near end sensor will start to rotate. When the release button rotates to position 2, the change from horizontal to vertical is complete. -
Page 17: Printer Maintenance
BTP-R180II User’s Manual 5 Printer maintenance Caution: Before starting routine maintenance, confirm that the printer power is turned off. Do not use solvents like gasoline or acetone. When cleaning sensors, the printer should not be switched on until the pure alcohol has totally evaporated. - Page 18 BTP-R180II User’s Manual Caution: The cutter sliding blade acts slowly during revolving the thumb wheel. Go on revolving and observe carefully; If the thumb wheel cannot be turned, do not force the wheel, instead turn it the opposite direction.
-
Page 19: Interface Signal
BTP-R180II User’s Manual 6 Interface Signal 6.1 Parallel interface Parallel interface can work in IEEE 1284 compatible mode or half-byte mode. The interface is 36PIN CENTRONICS. The Interface is defined as below: Source Function nStrobe Data 0 (Least Significant Bit) -
Page 20: Rs-232 Serial Interface
BTP-R180II User’s Manual 6.2 RS-232 serial interface The serial interface of the printer is compatible with RS-232, its connector is 9PIN female D type. PIN No. Signal definition PIN1 Not connected PIN2 PIN 3 PIN 4 PIN 5 Signal Ground... -
Page 21: Power Interface Definition
BTP-R180II User’s Manual Supports firmware update on-line Supports printer status query and interface module maintenance based on HTTP(only JK-E02 interface supports) 2) Interface signal definition Interface adopts 10/100M BASE-T standard in accordance with IEEE802.3. The interface signal is... - Page 22 BTP-R180II User’s Manual 2) Cash drawer interface outlet uses RJ-11 6P connector. 3) Interface signal definition Signal Name Functions Frame Ground DRAWER 1 Cash drawer 1 driving signal Cash drawer status test DRSW signal Cash drawer driving power DRAWER 2...
-
Page 23: Troubleshooting
BTP-R180II User’s Manual 7 Troubleshooting In case of printer fault, consult this section for solutions and advice. If you do not find a solution in this section, please contact your local dealer for assistance. 7.1 Printer doesn’t work Problems Possible causes... -
Page 24: Accessories
BTP-R180II User’s Manual 8 Accessories 8.1 Spill proof cover 8.2 HERALD – kitchen alarm system 8.3 Power Supply CASE This cover is used to install the AC power adapter under the printer; so that the power adapter would become an internal part of the printer (the power adapter will be inside of the printer). -
Page 25: Wall Mounting
BTP-R180II User’s Manual 8.4 Wall Mounting The printer can be mounted vertically on the wall according to below instructions: 1) Drill two holes (holes (OD: 6mm: 6mm, depth: 50mm: 50mm, space of two hole: 75mm) on the wall as in below figure: 2) Insert the plastic plugs in the holes and make sure that the plugs are fully inside the holes and do not stick out. - Page 26 BTP-R180II User’s Manual 4) Regulate the paper near end sensor (Please refer to 3.4.1), and mount the printer as figure. - 21 -...
-
Page 27: Power Management
Ready mode again after completing printing job. Relating Parameter of power management is as below: Maximum Default Delay Times < 5min Because the Maximum Default Delay Times is less than 5 minutes, BTP-R180II does not open the port of changing this time to end user.