Related Manuals for SNBC BTP-P33
Summary of Contents for SNBC BTP-P33
- Page 1 USER’S MANUAL Portable Printer BTP-P33 Shandong New Beiyang Information Technology Co., Ltd.
-
Page 2: Table Of Contents
BTP-P33 User’s Manual Contents 1 INTRODUCTION................- 1 - ....................- 1 - UTLINE 1.2M ...................- 1 - AIN FEATURES 2 MAIN TECHNICAL SPECIFICATION..........- 2 - 2.1T ................- 2 - ECHNICAL SPECIFICATION 2.2P .................. - 4 - APER SPECIFICATION 2.3 P ..............- 7 -... - Page 3 BTP-P33 User’s Manual 7TROUBLESHOOTING..............- 18 - 7.1 P ’ ................- 18 - RINTER DOESN T WORK 7.2 OLED ................... - 18 - ALARM 7.3 P ..............- 18 - ROBLEMS DURING PRINTING - 2 -...
- Page 4 Information in this document is subject to change without notice. SHANDONG NEW BEIYANG INFORMATION TECHNOLOGY CO., LTD. (hereinafter referred to as “SNBC”) reserves the right to improve product as new technology, components, software, and firmware become available. If users need further data about this product, please feel free to contact your dealer or the manufacturer.
- Page 5 OHSAS18001 Occupational Health and Safety Management System Certification IECQ QC 080000 Hazardous Substance Process Management System Certification Contact us: Address: No.169 huoju road, high-tech zone, Weihai, China Hot line: 400-618-1368 800-860-1368 Fax: +86-631-5656098 PC: 264209 Website: www.newbeiyang.com.cn BTP-P33 has passed the following certifications: - 4 -...
- Page 6 BTP-P33 User’s Manual General Safety Information Before installing and using the printer, please read the following items carefully. 1. Safety instructions Warning: Don’t touch the tear bar of printer.. Warning:The print head is a thermal element and it is at high temperature during printing or just after operation, therefore please do not touch it and its peripherals for safety reasons.
- Page 7 BTP-P33 User’s Manual Do not let the water or electric materials (like metal) go into the printer. If this happens, take out the battery immediately. Do not allow the printer to start printing when there is no recording paper installed; otherwise the print head and platen roller will be seriously damaged.
- Page 8 BTP-P33 User’s Manual - 7 -...
-
Page 9: Introduction
BTP-P33 User’s Manual 1 Introduction 1.1 Outline BTP-P33 is a mobile receipt / label printer, mainly used for indoor and outdoor mobile receipt and label printing, with following characteristics like good protection performance, long working hours of battery, compact, easy to operate, etc. -
Page 10: Main Technical Specification
BTP-P33 User’s Manual 2 Main technical specification 2.1 Technical specification Item Parameters Printmethod Thermal Print resolution 203DPI×203DPI Label: Max.50mm/s Print speed Receipt: Max.76mm/s Note: Factory default value is 50mm/s Print width Max.72mm Paper type Sticky label paper, black marked paper, continuous paper Continuous paper: 44±0.5mm, 60±0.5mm, 80±0.5mm... - Page 11 BTP-P33 User’s Manual Character Set (ESC/POS): built-in standard ASCII character (9X17,12X24), user-defined characters, standard configuration of Chinese (24 × 24) supports simplified Chinese (2312), English (ASCII), optional configuration supports simplified Chinese (18030 or GBK), traditional Character support Chinese, the United States, Britain, Japan and Korea.
-
Page 12: Paper Specification
BTP-P33 User’s Manual Input voltage: AC100-240VAC/50～60Hz Power adapter Output voltage: 12V±0.6V DC，1A Print head life ≥50Km(standard test conditions) Working temperature Temperature: -10 ~ 50 ℃, Humidity: 10 ~ 90%, and humidity non-condensation Storage temperature Temperature: -20 ~ 60 ℃, Humidity: 10 ~ 90%,... - Page 13 BTP-P33 User’s Manual Fig. 2.2.2-1Black marks on print sideFig.2.2.2-2 Black marks on non-print side The arrow directions in the figures are the paper feeding directions. Mark Description Parameters (mm) Paper width 44±0.5 Length of black mark 13~44 Space between black marks...
- Page 14 BTP-P33 User’s Manual Mark Description Parameters (mm) Paper width 80±0.5 Length of black mark 20~80(left)13~80(right) Space between black marks 10~1000 Height of black marks Paper thickness 0.06-0.10 Mark reflectivity <15% 2.2.3 Parameters of label paper Label gap: the transmission sensor (standard configuration) is located at the centerleft position Fig.
-
Page 15: Print And Tear-Off Position
BTP-P33 User’s Manual The arrow direction in the figure is the paper feeding direction. Parameters Mark Description (mm) Label width ≤B Liner width 80±0.5 Label length 10~1000 Label gap Paper thickness 0.06-0.16 Liner transmittance 50%-75% 2.3 Print and tear-off position 2.3.1 Print position... - Page 16 BTP-P33 User’s Manual For different paper width (L1), the print width(L2) and the distance from print content to left and right edges L3 / L4) will change according to the following table: Distance from Distance from the print content the print content...
-
Page 17: 3Appearance And Components
BTP-P33 User’s Manual 3Appearance and components 3.1 Apperance and components 1 － Middle cover 2 － Dust-proof rubber 3 － Top cover 4 － Cover open button 5 － Power/Serial/USB interface 6 － Button 7 － LCD 8 － Platen roller 9 －... - Page 18 BTP-P33 User’s Manual mode; press the button to wake the printer under sleep status. FEED button Under standby status, press the button for a short time to feed the paper for a small distance, while press the button for a long time to feed the paper for a long distance or positioning;...
-
Page 19: 4Installation
BTP-P33 User’s Manual 4Installation 4.1 Unpacking Check whether all items, which are listed on the packing list, are present and in a good condition. If any item is damaged or missing, please contact your dealer or the manufacturer. Packed items for standard configuration are as following: According to different customer’s options, the packed accessories may... -
Page 20: Battery Installation
BTP-P33 User’s Manual Waist bag: pack the printer in a waist bag and hang it to the waist by using a waist belt. Shoulder belt: pack the printer in a waist bag and hang it to the shoulder by using a shoulder belt. -
Page 21: Paper Roll Installation
BTP-P33 User’s Manual 4.4 Paper roll installation Press the spanner to open the top cover of printer; Install the paper roll as shown in the label affixed inside the paper cabinet. Different width of paper roll can be adjusted by the paper guide;... - Page 22 BTP-P33 User’s Manual Caution: Adjust the position of paper guide to adjust the width of paper cabinet according to the papersizeused: grasp the round hole on the back of paper guide and press down the lock claw of paper guide, rotate it upward and remove it;...
-
Page 23: Print Self-Test Page And Dump Mode
BTP-P33 User’s Manual 4.5 Print self-test page and Dump mode 4.5.1 Print self-test page Install the paper roll; Press the FEED button when the battery has power; Press the power button to turn on the power, and the printer will print the self-test page. -
Page 24: 5Routine Maintenance
BTP-P33 User’s Manual 5Routine maintenance Caution: Before starting routine maintenance, ensure that the battery of printer is taken out. Do not use organic solvents like gasoline or acetone. When cleaning the sensors, do not turn on the printer power until the pure alcohol has completely evaporated. -
Page 25: 6Interface Signal
BTP-P33 User’s Manual 6Interface signal BTP-P33 can connect with other devices via USB interface and wireless transmission. 6.4 USB interface USB interface supports USB2.0 standard protocol and can be connected directly to the computer for communication, also it can realize the printer commissioning, upgrading and other functions. - Page 26 BTP-P33 User’s Manual 7Troubleshooting When the printer has any problem, refer to this chapter for solution. If the problem still cannot be solved, please contact your local dealer or manufacturer for assistance. 7.1 Printer doesn’t work Problem Possible causes Solution Please charge the battery or The battery has no power.
- Page 27 BTP-P33 User’s Manual Paper roll is not installed Check whether the paper roll is correctly. installed correctly or not. Paper Use the recommended thermal specification. paper. Printout is not clear or has stains. Dirty print head or platen Clean the print head or the roller platen roller.
- Page 28 FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.