Esc ! N Select Print Mode - SNBC BTP-R580II Programming Manual

area direction and starting position as follows:
① When the starting position is set to the upper left or lower right of the print area by
② When the starting position is set to the upper right or lower left of the print area by
• The maximum right-side spacing is 255/203 inches. Any setting exceeding the
maximum is converted to the maximum automatically.
[Default] n = 0
[Example] 1B 40
1B 20 00 (Set character spacing to 0)
41 41 41 41 41 0A
1B 20 06 (Set character spacing to 6/203 inch)
42 42 42 42 42 0A
1B 20 0C (Set character spacing to 12/203 inch)
43 43 43 43 43 0A
Result:

ESC ! n Select print mode

[Function] Select print mode.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 255
[Notes] • Select print mode according to n as follows:
Bit
0
1,2
3
4
5
6
7
ESC T, the horizontal motion unit is used.
ESC T, the vertical motion unit is used.
ESC ! n
1B 21 n
27 33 n
1/0 HEX Decimal
0 00
1 01
0 00
1 08
0 00
1 10
0 00
1 20
0 00
1 80
0 Standard ASCII fonts (12 × 24)
1 Compressed ASCII fonts (9 × 17)
Undefined
0 Cancel emphasized mode
8 Select emphasized mode
0 Cancel double-height mode
16 Select double-height mode
0 Cancel double-width mode
32 Select double-width mode
Undefined
0 Cancel underline mode
128 Select underline mode
- 17 -
BTP-R580II Programming Manual
Function