Esc { N Select/Cancel Upside-Down Print Mode - SNBC BTP-R580II Programming Manual

[Notes] • This command is disabled in Chinese font.
• The range above applies to printers with universal configuration, depending on
printer configuration.
[Default] PC437 code (depending on printer configuration)

ESC { n Select/Cancel upside-down print mode

[Function] Select/Cancel upside-down print mode
[Format] ASCII
Hex
Decimal 27
[Range] 0 ≤ n ≤ 255
[Notes] • When the LSB of n is 0, upside-down print mode is cancelled.
• When the LSB of n is 1, upside-down print mode is selected.
• Only the LSB of n is valid;
• This command is enabled only when processed at the beginning of a line in standard
mode.
• When this command is input in page mode, the printer performs only internal flag
operations.
• This command does not affect printing in page mode.
• In upside-down print mode, the printer rotates the line to be printed by 180° and then
prints it.
[Default] n = 0
51
54
56
64
65
66
67
68
69
70
71 3848 (Brazil-ABICOMP)
72
73
74
75
76
77
78
79
80
81
ESC { n
1B 7B n
123 n
BTP-R580II Programming Manual
1257[Baltic]
771
774[Lithuanian]
3840 (IBM-Russian)
3841 (Gost)
3843 (Polish)
3844 (CS2)
3845 (Hungarian)
3846 (Turkish)
3847 (Brazil-ABNT)
1001
2001
3001 (Estonian-1)
3002 (Estonian-2)
3011 (Latvian-1)
3012 (Latvian-2)
3021 (Bulgarian)
3041 (Maltese)
8859
Persia
- 26 -